Marking and Labeling

excam-ipm1137-weblogo.png

Model Key: T08-VA2.3.K4.BOR3-LL.H-000.X-X

PN: 22070444


Certification

Camera-Series T08

icons-typenschild3.png

Ex-Marking ExCam

Model Key: T08-VA2.3.K4.BOR3-LL.H-000.X-X
PN: 22070444
Serial no.: from PT0806221*
Prod. Year: from 2025
PS: PoE++ C6, Typ.: 35.5W, Max.: 51.0W
Temp. Range: -45°C < Tamb < +50°C
Prot. Degree: IP68

TÜV 18 ATEX 8218X
Ex II 2G Ex db IIC T5 Gb
Ex II 2D Ex tb IIIC T95°C Db
Ex I M2 Ex db I Mb

No.RU.C-DE.HA65.B.01652/22
1Ex db IIC T5 Gb
Ex tb IIIC T95°C Db
Pb Ex db I Mb

IECEx TUR18.0023X
Ex db IIC T5 Gb
Ex tb IIIC T95°C Db
Ex db I Mb

WARNING:
DO NOT OPEN IN POTENTIALLY EXPLOSIVE ATMOSPHERES
Observe the safety instructions in the installation guide!

Not your language? Translate

To top

* for older serial numbers please contact supportsamcon.eu


Special conditions for safe use

  • The device is supplied without a cable tail and gland. The installation of suitable explosion-proof connection cable kits to the flipConnect is the responsibility of the user or can be found in the SAMCON compatibility table!
  • The pre-assembled red M25 blanking plug (nylon) is not explosion-proof and is only used as an assembly tool for connecting the flipConnect!
  • Use in mining areas (ATEX device Group I M2), is permitted!
  • No holes, whether blind or clear, may be drilled in the ExCam enclosure other than already provided by the manufacturer.
  • The requirements of EN/IEC 60079-14 must be applied.
  • All used cable glands and plugs have to be certified.
  • Due to the high weight of the camera, we recommend the use of a mechanical fall arrester (e.g. safety wire) in addition to the standard wall mount or ceiling mount bracket.

Datasheets, User Manual, Drawings, Certification, ... can be found on the product page


Manufacturer data / certificates

SAMCON GmbH
Schillerstr. 17
35102 Lohra
Germany

Manufacturer certificates