Model Key: T20-VA0.1.K1.BOR-L.N-***.1-K
PN: 24060127
Certification
| Scheme/market | No. | Ex-Installation Manual |
|---|---|---|
| ATEX Certificate | TÜV 21 ATEX 8696 X (2021) | DE, EN |
| IECEx Certificate | TUR 22.0076X (2022) | EN |
| UKEX Certificate | TÜV 24 UKEX 7178 X (2024) | EN |
| Further Certificates | upon request |
Ex-Marking
Model key: T20-VA0.1.K1.BOR-L.N-***.1-K
PN.: 24060127
Serial No.: from PT2000084*
Prod. Year: from 2024
PS: 12.9W@24VDC
Temp. Range: -30°C < Tamb < +50°C
Prot. Degree: IP66/68
TÜV 21 ATEX 8696X
Ex II 2G Ex db IIC T5 Gb
Ex II 2D Ex tb IIIC T95°C Db
IECEx TUR22.0076X
Ex db IIC T5 Gb
Ex tb IIIC T95°C Db
WARNING:
DO NOT OPEN IN POTENTIALLY EXPLOSIVE ATMOSPHERES
Observe the safety instructions in the installation guide!
Not your language? Translate
* for older serial numbers please contact supportsamcon.eu
Special conditions for safe use
- For Group I, the device is not suitable!
- No holes, whether blind or clear, may be drilled in the ExCam enclosure other than already provided by the manufacturer.
- The requirements of EN/IEC 60079-14 must be applied.
- All used cable glands and plugs have to be certified.
- The sight glass must not be directly covered by foreign objects. The light must be able to leave the optics of the protective housing unhindered. Regular cleaning intervals of the sight glass should be observed in order to avoid adhesion and dust deposits.
- Risk of burns from hot surfaces (≤95°C)!
- Do not stare into the direct beam. Danger of impairment of vision due to high exposure to light!
- The single wire cable connection may only be connected in a safe area (non-Ex zone)!
Datasheets, User Manual, Drawings, Certification, ... can be found on the product page
